6-Channel Analog Power Amplifier, rack ears included (replaces Z660/Z661)

6-Channel Analog Power Amplifier, rack ears included (replaces Z660/Z661)

A6
ELAN A6

Designed specifically for the Custom Installer, the A6 Power Amplifier is the cornerstone of any high-fidelity system.

Designed specifically for the Custom Installer, the A6 Power Amplifier is the cornerstone of any high-fidelity system. The A6 provides six channels at 30 WPC or three channels at 60 WPC in a 1-3/4 inch single rack-space plus additional features not found on an amplifier (of any size) on the market.

Six front panel gain pots, signal presence and clip indicators make setup a snap! A convenient Bus Mode switch allows one stereo input to be routed to three pairs of amplified outputs without the need for additional patch cables. Independent bridge mode buttons allow mixing of bridged and un-bridged channels. Buffered line level outputs can be Y-corded for mono signal applications.

The built-in IR connecting block can power up to four IR receivers and emitters – great for standalone IR control applications. The remote trigger input mutes the amplifier when the preamp is turned off.

The ultra-high-efficiency toroidal transformer and 40,000uF bulk storage capacitance ensures that peak current demands are always met.

ELAN A6 Features at a Glance
  • 30 WPC into 8 ohms, 60 WPC into 4 ohms
  • Front panel gain pots, signal presence, clip & IR pass-through LED indicators
  • Bus Mode switch
  • Buffered line level outputs
  • IR pass-through connecting block
  • Remote trigger IN / OUT
  • Only 1 rack-space high
  • Rack ears included

ELAN A6 Specifications
General
  • Number of Channels6
  • Watts RMS Per Channel30
Shipping Info
  • Length21.1 (Inches)
  • Width17.3 (Inches)
  • Height5.1 (Inches)
  • Weight17.6 (Lbs)
  • Unit of MeasureEach
  • UPC844039008947
  • Master Pack Qty2
Other Specifications
  • Power Output (RMS) per channel 30W @ 8 Ohms

    . . . . . . . . . . . . . . . . . . .60W @4 ohms

    Frequency Response . . . . 20Hz to 20kHz -.25dB

    Full Power Bandwidth . . . . . . . 10Hz to 30kHz

    Signal to Noise . . . . . . . >110dB (A-weighted)

    Channel Separation . . . . . . . . >70dB @ 1kHz

    THD . . . . . . . . . . . . . . . . . . . < 0.03%

    Intermodulation Distortion . . . . . . . . < -90dB

    Voltage Gain (Av) . . . . . . . 0 to 28, adjustable

    Input Impedance . . . . . . . . . . . . 20k Ohms

    Remote Trigger Input . . . . . . . . 5-24V AC/DC

    Trigger Loop Output . . . . . . +12VDC @ 0.1A

    AC Power Requirements . . . . . 120VAC, 440W

    Current Draw . . . . . . . . . . . 3.7A @ 120VAC

    Dimensions

    (in.) 17 W x 2-1/4 H x 11 D

    (mm) 432 W x 58 H x 280 D

    Weight. . . . . . . . . . . . . . . . . . . . . . .16 lbs / 7.2 kg

    Certifications: ETL® listed, CE

ELAN A6 Warranty

2 Year Limited Warranty